Model 005-302 Fan Heater.  3,500 BTU @ 180 F 3 GPM Flow

Designed specifically for heating of a small compartment similar to an Marine head compartment or small stateroom.  3” ducting and air outlet grill can be extended into those tight locations on a boat. 
Built in air vent and standard 3/4” water system connections.
Optional MPT or PEX solder fitting & two speed switch are available.  Complete with heater, ducting, clamps and air grill.

Height  :  4.125”
Width   :  6”
Depth   :  8”             12 or 24V Models available  

Model 005-919FF fan heater  8,000 BTU @ 180F 3 GPM flow

This heater equipped with three inch duct and air grill will fit into those location where the four inch ducting cannot fit.  Similar equipped as the Models 005-905FF & 914FF for in-field motor Air outlet air flow direction.  These FF Models can also be rotated 180 degrees so the top becomes the bottom for water hose routing with out the need for hose cross over.  Dual air vent fittings allow this feature. The Models 905FF,914FF & 919FF are all equipped with a five pass water coil for superior water flow & heat output.

Height  :  5.75”
Width    :  7”
Depth    : 8.5”          12 or 24V Models available

Model 005-909II cabinet toe space mounting fan heater.

Five pass water coil for 7,000 BTU rating. Black anodized aluminum cutout cover air grill.  Low profile (3.75”) allows installation in a cabinets toe space or other low profile location.  Ideal heater for galley space Installation for “Warm Feet” for the first mate for morning coffee or meal  preparation.  Heater can also be mounted vertical in those narrow unused space on some cabinets.

          12 or 24V Models available

Model 005-941FF Single 4” air outlet fan heater.

Five pass water coil for 16,500 BTU rating with dual 12V .36A fans.  Complete with ducting, duct clamps & air outlet  grill.  Ideal fan heater for large cabin heat utilizing space saving single duct & air outlet grill.

FF models allows hose routing and connection from either side of the mounting compartment..

          12 or 24V Models available

Model 005-942FF Dual 4” air outlet fan heater.

Five pass water coil for 16,500 BTU rating with dual 12V .36A fans.  Complete with ducting, duct clamps & air outlet  grills.  Ideal fan heater for large cabin heat utilizing dual outlets for even heat circulation. 

FF models allows hose routing and connection from either side of the mounting compartment.

          12 or 24V Models available

Model 005-942-C 

Combination windshield defrost with four 2” outlets and single 4” outlet for helm station heat from one fan heater.  High capacity squirrel cage 3 speed motor  for high air movement for windshield defrost and single quiet low amperage fan  for helm station heat from one heater.

Heater is equipped with ducting, 2 & 3 speed switch and air Outlet grills.

          12 or 24V Models available