Model 005-930 Fan Heater

Single 4” outlet duct system
D&W 4” Adjustable air flow Direction Grill
5’ flexible 4” ducting with plastic duct clamps
MSR 005-711 3 speed switch & mount plate
3/4” hose connection (special order 5/8” or “PEX” adapter)

25,000 BTU 170F Water Temp @ 3 GPM flow

Model 005-932 Fan Heater 

Dual 3”  outlet duct system Two 3” 
Adjustable air flow Direction Grill 10’
flexible 3” ducting with duct clamps
MSR 005-711 3 speed switch & mount plate 3/4” hose connection (special order 5/8” or “PEX” adapter)

25,000 BTU 170F Water Temp @ 3 GPM flow

Model 005-933 Fan Heater 

Three 2 1/2”  outlet duct system
Three 2 1/2”  Adjustable air flow Direction
Grill 15’ flexible 2 1/2”  ducting with  duct clamps
MSR 005-711 3 speed switch & mount plate 3/4” hose connection (special order 5/8” or “PEX” adapter)

25,000 BTU 170F Water Temp @ 3 GPM flow

Model 005-934 Fan Heater

Four 2 1/2”  outlet duct system
Four 2 1/2”  Adjustable air flow Direction
Grill 20’ flexible 2 1/2” ducting with duct clamps

MSR 005-711 3 speed switch & mount plate
3/4” hose connection (special order 5/8” or “PE)

Dimensions . 6"High • 9" Wide • 11.5" Deep

Part #  MM-109

3” Ducted  Model Fan Heater
For windshield defrost or cabin heat in multiple locations.
5/8” hose connections, 3’ ducting outlets, three speed motor is available in 12 or 24V  models.
 
Adjustable Floor or overhead mount brackets

3 speed 12 V Motor

22,000 BTU at 180F 3 GPM

5/8"Hose connections
Reversible floor or ceiling mount brakets

Dimensions
6.75” High • 9.75” Wide • 9.75” Deep

Part #  MM-109 PF

Compartment side wall
Mounting flange for built-in Mount.

5/8” hose connections,
Three speed motor is available in 12 or 24V models.

22,000 BTU at 180F 3 GPM

Mounting Face Plate Size
Height 7.5"
Width 11.375"